EASYHANDLE KITS · U.S. PATENT PENDING
Choose a reusable Ford, GM or Ford + GM temporary-handle system developed by a working installer for wrap, PPF and related shop work.
$150 × 2 = $300Two comparable specialist lockout callouts avoided would exceed the kit price, based on real past $150 callouts in ShofLab shop experience.
Reported shop-fit records: Ford Bronco 2024–2026, Ford F-150 Raptor 2024–2026 and Ford Maverick 2025–2026. Exact body, trim and door-position details are being documented; confirm your configuration before ordering.
CHOOSE YOUR KIT
Select the vehicle family your shop works on. Every card opens the exact product page; free standard U.S. shipping is included.
FORD KIT4 Ford handles + storage case$244.99View product and order →
GM KIT4 GM handles + storage case$244.99View product and order →BEST FOR MULTI-BRAND SHOPSFORD + GM COMBO8 handles total + 2 storage cases$394.99View product and order →Not sure which kit fits? Request a free compatibility review →
THE SHOFLAB DIFFERENCE
Every ShofLab tool starts with a bottleneck encountered during real automotive work. EasyHandle was created by a professional wrapper who needed reliable door access after the factory handles were removed.
Why EasyHandle was built →Open and close the door while the factory exterior handle is removed.
EasyHandle mounts at the original handle position without a permanent vehicle modification.
Use a purpose-built temporary handle instead of relying on tape, cord or repeated workarounds.
Each Ford or GM kit contains four reusable handles and a storage case. Confirm every intended door position before ordering.
REAL 20-SECOND DEMO
Watch EasyHandle install in the factory handle location, then open and close the door on a real shop vehicle.
A REAL SHOP COST
During shop work on certain Chevrolet/GMC configurations, ShofLab has encountered a risk that a closed door may become inaccessible after the factory exterior handles are removed. When correctly matched and installed, EasyHandle keeps a purpose-built way to operate the door available during the job.
Confirm the exact configuration →Before creating EasyHandle, the ShofLab founder experienced Chevrolet/GMC door lockouts during professional shop work that required specialist callouts costing $150 per incident. Those real incidents became the reason EasyHandle was developed. Preventing two comparable callouts would avoid $300—more than the $244.99 Ford or GM kit price.
The $150 figure is based on actual past callouts in the founder's professional experience. The $300 calculation means two comparable incidents avoided, not simply two EasyHandle installations. Future service prices vary, a lockout is not guaranteed to occur, and correct compatibility and installation are required. Downtime is not included.START WITH THE FORD KIT
Ford leads the first sales test. GM and Combo remain available for reviewed applications.
Temporary handles for Ford shop workflows. Confirm the exact vehicle and intended door positions before ordering.
4 reusable Ford handles + storage case
1-year limited replacement warranty
Two complete kits—one Ford and one GM—each with its own storage case.
8 reusable EasyHandles total + 2 storage cases
1-year limited replacement warranty
Temporary handles for GM shop workflows. Exact GMC model records are still being documented.
4 reusable GM handles + storage case
1-year limited replacement warranty
Keep squeegees, blades and daily tools visible and within reach.
A compact, stable home for your most-used squeegees.
No matching tools found. Try another search.
REAL SHOP REVIEW
As someone who works hands-on with vehicles every day, I was genuinely impressed by the EasyHandle. Before using it, we frequently ran into a frustrating and sometimes serious problem with GMC and Chevrolet vehicles: when the door handles were removed for vinyl wrap installation, the doors would occasionally lock and become impossible to open—from either the inside or the outside. Once we started using EasyHandle, that issue disappeared completely. We now use it as standard equipment on every Chevrolet, GMC, and Ford vehicle that comes through our shop.
Beyond solving the lockout problem, EasyHandle has made everyday tasks significantly easier. When applying vinyl wrap and trimming excess material along the edges, we can open and close the doors freely without relying on hooks, strings, or other makeshift workarounds we used to depend on. It’s a simple tool, but it has made a real difference in our workflow and eliminated a recurring headache.
EasyHandle is a smart, practical invention, and in my professional opinion, it’s well worth the investment.
Disclosure: The EasyHandle kit used by MegaGraphics was provided at no charge. This testimonial reflects Rassal’s own professional experience. It is not a universal compatibility claim; confirm the exact vehicle, year, trim and intended door positions before ordering.
CHECK BEFORE ORDERING
Vehicle handle geometry can vary by model year, body style and door position. If your exact configuration is not fully documented in our records, send us photos and measurements before purchasing.
Physical use has been reported. Exact body, trim and door-position records must also be stored before we call a configuration fully documented.
The vehicle or mounting geometry may match an existing record, but the intended configuration still needs confirmation.
We need photos and measurements before offering a preliminary assessment.
CURRENT FIT RECORDS
Compatibility can vary by trim, body style and handle mechanism. Ford F-150 Raptor model years 2022–2023 are not listed as verified until their test records are confirmed.
FREE PRE-PURCHASE REVIEW
Not listed does not mean it will not fit. It only means we have not yet physically tested or documented that exact vehicle configuration.
Send the make, model, year, body style and door position, plus clear photos of the factory handle, mounting opening, retaining mechanism and key measurements.
A photo review is a preliminary assessment, not a guarantee of fit until EasyHandle has been physically tested on the exact configuration. Write directly to info@shoflab.com.Do not disassemble a customer vehicle solely for a compatibility request. Photos should be collected during planned service work by a qualified professional.
BEFORE YOU BUY
EasyHandle is a configuration-specific professional tool. ShofLab keeps the fit review, one-year warranty, delivery and return paths visible before checkout.
Send the make, model, year, body/cab style, trim and intended door positions, together with clear photos and measurements.
Check your configuration →Standard shipping within the United States is free. Orders are normally processed in 1–2 business days and estimated to arrive 3–9 business days after payment confirmation.
Read the shipping policy →Eligible unused returns may be requested within 14 calendar days of delivery. ShofLab covers an authorized return when our written compatibility confirmation was incorrect.
Read the return terms →If an EasyHandle handle breaks during correct, normal intended shop use within one year after delivery, ShofLab replaces the affected handle under the published terms.
Read coverage and exclusions →Use the warranty decision guide first. Questions about fit, installation or the correct kit can then be sent with the requested details.
Email ShofLab →BEFORE ORDERING
Fit varies by model year, trim, body style, handle mechanism and door position. Check the current fit records and request a free photo review when the exact configuration is not fully documented.
Each Ford or GM kit includes four reusable EasyHandle temporary handles, one storage case and protective retail packaging. The Combo Kit includes one complete Ford kit and one complete GM kit, each with its own storage case.
No. It is reusable professional equipment intended for repeated compatible shop jobs. Inspect every handle before use and stop using it if damage or unusual wear is visible.
EasyHandle uses the compatible factory exterior-handle location as a temporary way to operate the door during professional work. Compatibility must be confirmed before installation; it is not a permanent vehicle modification.
Standard shipping within the United States is free. Orders are normally processed in 1–2 business days and estimated to arrive 3–9 business days after payment confirmation.
Eligible unused, undamaged and complete kits may be returned when requested within 14 calendar days of delivery. The customer pays return shipping for a change of mind or ordering error. ShofLab pays authorized return shipping for a manufacturing defect, shipping damage, incorrect item or incorrect written compatibility confirmation.
If an EasyHandle handle suffers a covered functional failure or breaks during correct, normal intended shop use within one year after delivery, ShofLab will replace the affected handle and pay standard U.S. replacement shipping. Forced or incorrect installation, incompatible applications, modification, impact, vehicle movement, loss and cosmetic wear are not covered. Read the full limited warranty and claim checklist.
THE PRO HUB
We are documenting real installations, compatibility results and maintenance guidance before publishing them.
Vehicle configurations, tested door positions, handle versions and installation notes.
A clear process for installing and removing the temporary handle correctly.
Honest observations from professionals who have physically used the product.
OUR STORY
Through professional automotive work and vehicle wrapping, the ShofLab founder kept running into the same door-access problem after factory handles were removed. EasyHandle was built for a real shop workflow first, then refined through continued professional use.
Talk to ShofLab →